Skip to Content

How to Remove Mold on Walls and Fix the Cause

If you are a DIY enthusiast, it is likely you will be aware of tiled walls and how to keep them looking fresh, but for the many homeowners who either don’t have the time or inclination to mess with this type of work, there is always the trusted plumber. If you don’t fit into either of the above categories, you will need some hints on how to keep your walls looking like new.

Mould Behind Tiles

Mould often forms in cavity walls, and the main cause is a breach of the damp proof course (DPC), which is a bitumen or resin type of material that is laid into the brickwork a few inches above the ground. This protective layer stops moisture moving up from the ground into the brickwork, and if it is compromised in any way, then expect rising damp.

Removing Mould from Interior Walls

Typically, this is quite easy as the inside walls are not normally porous, so a damp cloth with perhaps some detergent will easily remove the mold. Of course, one mustn’t forget to find the cause of the mold and rectify that, and if you are in Western Australia, and in need of water leak detection in Perth, there are online plumbers who can source any leak quickly and efficiently.

Water Leaks

The other main reason for mold to form on the walls is a leaking water pipe, and should you notice the bill creeping up, this is also a sign of a leak. Even a small leak can add up, as it is seeping out water continually. For anything water related, contact perth-plumber.com.au/ and they can send someone round to detect and repair the leak before it does too much damage. The slip joints are often the source of a water leak, and plumbers today have sophisticated equipment that can pinpoint a leak without causing any damage to the structure.

Porous Surfaces

If the wall is porous, like concrete unpainted surface, then the mold will actually be growing under the surface, and in this case, you will need to take the top few millimeters off and rescreen with new plaster or concrete.

High Humidity and Condensation

If you spot a damp patch on the wall, it doesn’t automatically mean you have sprung a water leak. It could be caused by a high level of humidity, or even condensation, which is a form of moisture. All mold thrives in damp or moist conditions, and if your home is too damp, you might consider adding some vents to improve the air circulation from room to room.

Windows and Door Frames

Although mold cannot feed on glass, if the window is dirty and damp, the dirt will become ingrained onto the glass, and the mold will then feed from that grime layer. Timber that is always wet will decay and then mold can easily form, so if the windows and doors suffer from condensation, consider double glazing as this will all but eliminate it.

Mould is likely to be caused by a leak, and by calling your local plumber, they can quickly locate the compromised pipe and repair the damage before it becomes a major task.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.