The bathroom partition pricing is always important regardless of whether you are planning to build a new bathroom, or you are just going to refurbish it.
With that, it is really recommended that you have a thorough evaluation first as to the type of material that you want to get so that you will have a more precise estimation when it comes to the bathroom partition pricing for your project.
Some Features to Consider Along with the Bathroom Partition Pricing
1. Check the strength of the material
If the material that you consider to work on is made out of steel, you should consider that steel is made out of iron and when the iron gets exposed to moisture, rust will then start to appear.
Moisture can either be brought about by rain or from ambient humidity.
However, if you are to use stainless steel or a galvanized steel surface, then you have another thing going because this type of material is resistant to corrosion and staining.
This type of material is also low maintenance thus making it really ideal for bathroom partitions.
The galvanizing process is made by applying a zinc coating to sheets of steel.
This is called the “continuous hot-dip”, wherein the steel sheet is going to pass through molten zinc.
The molten zinc will then bond with the iron thereby forming a protective layer on both sides of the sheet of steel.
This can then be spun into a finished part because the zinc coating is not going to flake or peel off when the metal spinning process will take place.
If it’s a honeycomb structure, some people may tend to think its inner core is not that strong to withstand constant wear in the bathroom.
However, this will really depend on the manufacturer of such material. So always see to it that you are dealing with an item that is from a manufacturer with best practices.
2. Check the lightness of the material
If you are considering using stainless steel alone, this type of material is much lighter than those which have a honeycomb structure.
This honeycomb structure is natural or man-made and this has a geometry of a honeycomb.
This allows the minimization of the material that is being used in order to reach the minimal weight and the maximum strength.
So, if you like to prefer a honeycomb structure, then this honeycomb structure will be able to provide you with a material that is less dense and has relatively high compression properties and shear properties.
3. Check the material’s resistance to water
If the material is made out of galvanized steel or stainless with, including a honeycomb core, then this can be great in a wet environment like a shower room.
This is because other components are present and the honeycomb panels are going to adapt to the fine fluorine carbon aluminum sheets.
4. Check if the material is fire resistant
This is also one aspect that you should check.
This is because fire fighting is really crucial especially for commercial and public places.
Aside from regular monitoring and inspection, it is also important that the material you chose is one that has the ability to withstand fire.
Stainless steel is one of the materials that have the ability to withstand fire.
Another one is if it has a honeycomb core that is made out of aluminum metal.
This is because this has a good sealing and a great heat insulation performance, meaning resistant to fire.
5. Check if the material is resistant to corrosion
If you consider using galvanized steel, this can be a good choice because this has been coated ion zinc.
This means that galvanized steel can be resistant to corrosion.
Another example of a corrosion-resistant material is stainless steel because the corrosion resistance is increase when the chromium content is also increasing.
Molybdenum is one element that can also contribute to the increase in the corrosion-resistant attribute of material especially when it comes to the reduction of acids and against the putting attack in chloride solutions.
So, you can also see that there are a number of grades of stainless steel that also have different chromium and molybdenum contents that will suit the environment.
So, if you are to use stainless steel, you are already going in with a good decision because this is one material that contains both strength and resistance to corrosion.
Even absent the additional or secondary painting or coating, the material is already in itself resistant to corrosion, thereby making this the most economical process when it comes to protecting steel from corrosion.
6. Check the durability of the material
When it comes to choosing the right material, durability is also one of the most important aspects that you should be able to check.
This is not only because as frequently as the user is going to be, but there will also be a number of people who are going to slam the doors either intentionally or not.
Aside from that, there are also other factors that you are to consider like moisture and humidity which are more like to contribute to the material’s wear and tear.
Thus, it is important to check the durability of the material because this should be able to combat negative elements and the hits that the partition is going to take.
So, with this, you may want to consider getting a partition that is made out of stainless steel as this is durable, low maintenance, and also cost-effective.
It can even last for at most 20 years of use.
7. Check if the material can be easily cleaned and maintained
Aside from the material’s durability, you should also see to it that the material can also be easily cleaned and is low maintenance.
The reason here is that regular maintenance is one important factor especially if the partition is to be used in public restrooms.
This also makes your workload and life much easier especially if the material is low maintenance.
Although the ways of cleaning the partitions are going to vary, it still should not give a hard time when it comes to maintaining it.
The best choice for this one is stainless steel because the dust on the surface can be easily cleaned with warm water, soap, or a low alkaline detergent.
Of course, the material that you chose will eventually depend on the aesthetic that you want.
But, if you are to stick to a budget, see to it that you will be able to get the most out of the money that you allocated when it comes to bathroom partition pricing.