Skip to Content

Fix That Flat: Common Sense Tips For Using A Tire Jack

Does your car require a change in a tire? You will require a jack to execute the task, but remember that the situation might not be ideal. Whether you are at the comfort of your own garage area or anywhere in the middle of a highway, lifting your vehicle up with the aid of the tire jack is not an easy job and entails some risks as well.

There are certain tips that you can follow to make the whole process a little safer for you and your vehicle and avoid any unwanted situation. Holden Dodge Chrysler Jeep Ram encourages to follow them as well.

Fix That Flat: Common Sense Tips For Using A Tire JackHave a good knowledge about the tire jack

The majority of the vehicles are accessible with a small scissor jack which has the potential for an emergency tire change, especially on the roadside. It is suggested to have a good knowledge of your tire jack before any such emergency situation pops up.

Ensure the car is secured and safe

It is your responsibility to make sure that you park the car on a level surface and the emergency brake is also set firmly. In case your car is equipped with automatic transmission, it should be maintaining the parked position. On the other hand, the manual transmissions vehicles must be left in gear. The wedge blocks situated on the front and the rear of the tire with a diagonal angle need to be lifted.

Set the jack on the proper spot

There is a common mistake that the majority of us commit and that is setting the jack under the bumper. You have to remember that jacks are not designed to withstand the entire weight of the car. There might be a breakage under the stress and your car might fall down. The jack must be placed beneath the frame of the vehicle. In case you are in doubt, don’t neglect to check the manual of the car.

Maintain a steady position

It is vital to position the tire jack on an even and a reliable surface area. When the surface is covered with gravel or is hard, position abroad and a stable panel beneath the jack. This is important, especially for those cars that come with small, factory provided and narrow base tire jacks.

Caution must be executed

You need to bend the jack upward very gradually. You might be in a hurry, but it is suggested to take time and be very cautious for not position any part of your body beneath the car. This is done in order to prevent any accident, in case the car falls. Once you have changed the tire, ensure that the vehicle is brought down the same way, slow and with caution.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This site uses Akismet to reduce spam. Learn how your comment data is processed.