As you get older you start to see hair in places you don’t want to see it! Now that I am 39 I am constantly pulling hairs that show up on my face! I would like to be able to shave my legs and not get any razor bumps or cut myself shaving. Well I was so happy to have the chance to review the Silk’n Flash & Go. It should really be called “Simple” Flash and Go because the treatments are so easy to do. The device does all the work for you. All you need to do is clean, shave and dry the area you wish to treat.
This unit utilizes technology that is very similar to what is used in thousands of permanent laser hair removal clinics and salons across the world. The Home Pulsed Light (HPL) technology used in the device has been cleared by the FDA, and has been used all over the world, including the United States, Canada, Europe, Asia, and Israel, to give users exceptional permanent hair removal results from the privacy and comfort of their own home.
Flash and Go Hair Removal really has a smaller sized head size than the Silk ‘n SensEpil by 2cm, however due to the size and shape of the Flash and Go Hair Removal it can more effectively treat tough to reach and sensitive areas such as the bikini line, upper lip, and other areas that need an even more targeted technique. I particularly wished to focus my hair removal around these 2 areas.
The Silk’n Flash and Go is a significant money saver! If you get laser hair removal done at a salon, you could easily spend near $2,000. Not only cost-effective, but the product and treatment sessions are very simple and fairly quick. (And it doesn’t hurt like waxing does!) If you are removing hair from a private area, you can use the product from the privacy of your own bathroom!
So easy to use!
The area of the skin should be thorough cleaned and dried first.
Press the “Standby/On” button and wait about 3.5 seconds for the “Ready Indicator” light to illuminate.
After the treatment areas have been tested on the lowest energy setting, choose the appropriate energy level setting. Users should use the highest energy setting that they can tolerate comfortably. This ensures that the user is getting the most effective treatment possible.
Place the tip to the area being treated, making sure to keep all edges of the treatment surface against the surface of the skin. When the treatment surface has been placed properly, the “Ready Indicator” light will blink.
Press the “Pulse” button.
Move the wand to an adjacent area of the skin, and repeat the process above. Users should make sure to work in one direction (top to bottom) to ensure that all areas of the skin have been completely treated.
Users should take special care to avoid sun exposure during the three weeks before, and the three weeks after they perform a treatment. This helps ensure that no adverse side effects are experienced. Proper sun protection includes the use of covering garments, or sunscreen with an SPF of at least 50.
For the first three to four treatments, users should treat their skin every two weeks. After these sessions, treatments can be performed when hair begins to grow back. After repeated use, the hairs will grow back finer, lighter, and eventually not at all. This process takes an extended period of time because of the way the device acts on body hair.
The Silkn Flash & Go also comes with a Instructional DVD User Manual to help guide users through a treatment so it is recommended you do read everything before using the first time.
When I used for the first time there was a pulse of light. I would say you feel nothing depending on the setting, you may feel something like a quick snap or a tingle feeling. Then you lift the device from your skin and move it to another location. It is very lightweight and easy to use very simple!
I like to see immediate results, you might be a little frustrated, but just stick with it, it will take a few treatments. On my legs I started out slow and began the process at the lowest setting, level one I made it to the highest setting (five) and completely noticed results. I wanted to make sure I would not get any reactions on my legs. I did see a little redness on my skin , but it typically subside within about 24 hours.
For anyone who is looking to try a laser hair removal system, I highly recommend giving Silk’n Flash and Go a try! The price is very competitive to others on the market, it is easy to use, the pain level isn’t too terrible, and the clean up is easy!
Follow Silk’n on Facebook
Silk’n is giving 1 lucky KTOT Fan a chance to win a Silk’n Flash and Go of their own! $299 Retail Value. Enter Below And Good Luck.